SSCM-1E DIY Electric Guitar Kit (Mahogany and Ebony Fretboard)

, , ,

SSCM-1E DIY Electric Guitar Kit

The SSCM-1 DIY Electric Guitar Kit features a mahogany body with white binding.  This kit, one of the most popular in our range, is powered by two quality Humbucker pick-ups, and the mahogany neck is finished with a quality Ebony fretboard, complete with 22 frets.


Free Shipping Anywhere in Australia!

AUD $267.75

In stock

Upgrade the Chrome Hardware to Black or Gold

Upgrade the Tuners to Grover 406C Mini Locking Rotomatics

Copper Shielding Tape

add Copper Tape to shield your pickup and control cavities, to get rid of annoying electrical “hum”

Bone Nut Upgrade

Upgrade the Plastic Nut to a Bone Nut

Headstock Decal

Which colour Pit Bull Guitars Headstock Decal would you like?

Product ID: 46990 SKU: SSCM-1E Categories: , , ,

Pit Bull Guitars SSCM-1E Electric Guitar Kit Includes:

  • Mahogany body (no veneer)
  • Carved top
  • White binding
  • Mahogany Neck (set neck, Modern C profile) with Ebony Fretboard (22 medium jumbo frets)

Hardware pack includes:

  • 2 Humbucker pick ups
  • 2 volume and 2 tone knobs and 3 way switch
  • Classic Tune-o-matic chrome bridge
  • Chrome die-cast machine heads (Upgrade to Grover 406C Mini Rotomatics Locking Tuners from $44.95)
  • Guitar lead
  • Strap buttons
  • Scratch plates and screws
  • All electronics (pots, caps, wires and solder)
  • FREE Ernie Ball Super Slinky Strings
  • Level of Soldering Difficulty: Advanced – there are a number of solders that can be challenging for new builders.

This kit contains everything you need to build a complete, playable guitar, except your choice of finish.

Weight 4.5 kg
Dimensions 72 × 50 × 8 cm

, , ,




  1. Tate Bloom (verified owner)

    I was really impressed with the woodworking on this guitar! It needed very little sanding and the neck fit was excellent. I was nervous about how much neck pocket work I might need to do, but it was a very tight and appropriate fit. I mostly wanted this kit just for the wood pieces but the tuners and bridge are acceptable, however I didn’t use any of the electronics. The ebony wood on the fretboard and the inlay were excellent and the binding was really clean also. As expected the frets needed some sanding and leveling. The only negative for me was the default plastic nut was glued on really tightly to the point I didn’t want to try to break it off and possibly damage the neck or fretboard. Overall this is an excellent kit, I would definitely buy this again, I think it’s a really great value for the quality of the woodworking.

Only logged in customers who have purchased this product may leave a review.

You may also like…