Pit Bull Guitars “Make Your Own” Luthier Tool Kit

, ,

Make Your Own Luthier Tool Kit (min. 3 tools)

*Please note: The main image shows some of the available tools.  Purchasing this item at $0.00 does not actually buy any tools.

Simply add the tools you need, below, to make your own Luthier tool kit and save 20%.

Minimum tools for a kit is 3 Tools.

Pick only the tools you need and save money by combining them into a kit.

The main image* features all the tools available:

  • Straight Edge Rule
  • Fret Rocker
  • Fretboard Protectors
  • 12″ Radius Measure
  • 12″ Radius Wood Sanding block
  • Neck Support Block
  • 13pc Nut File Set
  • Flexible Sanding Block
  • String Cutter, Fret Nipper
  • String Winder and Bridge Pin Puller
  • Flat, 4 sided fret file
  • Fret crowning file
  • String height (Action) Gauge
  • All purpose spanner/wrench for tightening hex nut or removing controls

Ideal for the newbie DIY builder or gigging Guitarist who needs to do some repairs on the run.

 

From: AUD $0.00

Pit Bull Guitars Straight Edge for Guitar

The notched straightedge is used for checking the straightness of your fretboard and features 2 notched edges to avoid contact with the frets.

One side is scaled at 25.5" scale, and the other side is 24.75" scale.

Made of hard wearing stainless steel.

In stock

Pit Bull Guitars Sanding Block

Flexible foam sanding block designed for uniform sanding.

In stock

Pit Bull Guitars Steel Fret "Rocker"

Steel Fret Rocker designed with 4 straight edges to test every set of 3 Frets, to check for high (or low) frets.

Simply place the appropriate edge over every set of 3 frets.  Then, if it ain't rockin', don't bother knockin'... in any frets (this may be an exclusively Aussie reference)

Made from 2mm Steel.

In stock

Pit Bull Guitars Fret Levelling File

Fret Levelling File

Four sided, fret levelling file, with adhesive abrasive.

In stock

Pit Bull Guitars String Action Ruler Gauge

String Action Ruler

Measure the string height (action) on your guitar or bass

In stock

Pit Bull Guitars Multi Tool Spanner Wrench

Multi Tool Spanner Wrench

  • Stainless Steel
  • Smooth to protect guitar finish
  • One end tightens, the other end loosens
  • Tightens nearly any nut, jack, switch, collar, wheel etc. on a guitar up to 1/2"
  • Great for removing control knobs

One end of the Multi the tool can fit under a Volume or Tone knob and is specially angled for clearance over a guitar body or peghead.

One end of the tool is toothed for loosening a nut; the other end tightens it.

2mm thickness

In stock

Pit Bull Guitars Fret Crowning File

Fret Crowning File

Narrow fret crowning file, with 4" filing surface and rubber handle for comfortable use.

In stock

Pit Bull Guitars Fretboard Protectors (2 piece)

Fretboard Protector 

Narrow fret guards to protect your fretboard when working on frets.

In stock

Pit Bull Guitars 12" Radius Gauge

12" Radius Gauge

This 12" Radius Gauge can be used to check the radius on your neck, nut and bridge saddles.

Ideal for an accurate bridge and nut set up, to match your Pit Bull Guitars 12" fretboard radius.

(other radius gauge sizes coming soon)

In stock

Pit Bull Guitars String Winder and Bridge Pin Puller

Pit Bull Guitars String Winder and Bridge Pin Puller

With fitting to attach to an Electric Drill... if you really need to do that.

In stock

Pit Bull Guitars Nut File Set (13 files)

Pit Bull Guitars Nut and Saddle File Set (13pc)

For filing String Slots.  Includes 13 different Gauge Files in a handy pocket sized holder.

In stock

Pit Bull Guitars String Cutter Fret Nipper

Pit Bull Guitars String Cutter and Fret Nipper

The perfect pair of pliers for cutting string ends and trimming frets

In stock

Pit Bull Guitars String Winder and Bridge Pin Puller

Pit Bull Guitars String Winder and Bridge Pin Puller

With fitting to attach to an Electric Drill... if you really need to do that.

In stock

Pit Bull Guitars Neck Support Block (Firm Foam)

Neck Support Block

Made from firm foam to protect and support your Guitar or Bass Neck while you work on it.

Available on backorder

Browse Wishlist
Product ID: 21525 SKU: A1-Kit Categories: , ,
Weight .025 kg
Dimensions 4 × 4 × 0.05 cm

Pit Bull Guitars Straight Edge for Guitar

Weight .125 kg
Dimensions 42 × 3.8 × .32 cm

Pit Bull Guitars Sanding Block

Weight .025 kg
Dimensions 8 × 5 × 2 cm

Pit Bull Guitars Steel Fret "Rocker"

Weight .025 kg
Dimensions 8 × 5 × 2 cm

Pit Bull Guitars Fret Levelling File

Weight .125 kg
Dimensions 15 × 3.8 × 2.5 cm

Pit Bull Guitars String Action Ruler Gauge

Weight .025 kg
Dimensions 15 × 3.8 × 2.5 cm

Pit Bull Guitars Multi Tool Spanner Wrench

Weight .025 kg
Dimensions 15 × 3.8 × 2.5 cm

Pit Bull Guitars Fret Crowning File

Weight .025 kg
Dimensions 15 × 0.8 × 0.2 cm

Pit Bull Guitars Fretboard Protectors (2 piece)

Weight .025 kg
Dimensions 7.9 × 0.23 × 0.05 cm

Pit Bull Guitars 12" Radius Gauge

Weight .025 kg
Dimensions 4 × 4 × 0.05 cm

Pit Bull Guitars String Winder and Bridge Pin Puller

Weight .125 kg
Dimensions 10 × 4 × 3 cm

Pit Bull Guitars Nut File Set (13 files)

Weight .125 kg
Dimensions 10 × 4 × 3 cm

Pit Bull Guitars String Cutter Fret Nipper

Weight .125 kg
Dimensions 10 × 4 × 3 cm

Pit Bull Guitars String Winder and Bridge Pin Puller

Weight .125 kg
Dimensions 10 × 4 × 3 cm

Pit Bull Guitars Neck Support Block (Firm Foam)

Weight .125 kg
Dimensions 10 × 4 × 3 cm